anti-corrosive
ANTI--CORROSIVE PRIMER FOR RUST
〖NANO ANTI-CORROSIVE PRIMER〗
GENERAL INFORMATION
〖NANO ANTI-CORROSIVE PRIMER〗 is anti-corrosion, weather-resistant enamel primer over the rust.
The structure of 〖NANO ANTI-CORROSIVE PRIMER〗 is a nano-sized silica sol and alyumozol (boehmite). Addition of the nanoscale sol 〖NANO ANTI-CORROSIVE PRIMER〗 provides significant reduction of the organic binder while maintaining elasticity of the coating and a substantial increase in adhesion to various substrates, as well as the cohesive strength of the coating. The coating 〖NANO ANTI-CORROSIVE PRIMER〗 practically doesn't shrink due to the high percentage of solids, and has high heat resistance.
In covering 〖NANO ANTI-CORROSIVE PRIMER〗 embodied a fundamentally new approach to corrosion protection, consisting in a complex chemical interaction between molecules of components with iron oxides and the atoms of the metal lattice. The primer has the ability to penetrate into cracks and pores of the metal while suppressing the started process of corrosion. Thus, solid metal chelate complexes with the polymeric component form on the surface of primer, effectively to protect the metal from an external impact. This mechanism of action allows 〖NANO ANTI-CORROSIVE PRIMER〗 firmly tie layer of rust to 100 microns.
High corrosion resistance of 〖NANO ANTI-CORROSIVE PRIMER〗 minimizes the extensive work on the preparation of metal surfaces for painting, especially in hard to reach areas of structures, facilities or remote routes of pipelines, bridges, and also allows the use of 〖NANO ANTI-CORROSIVE PRIMER〗 as an independent coating .
〖NANO ANTI-CORROSIVE PRIMER〗 consists of alkyd varnish, rust modifiers, fillers and target specific nanostructure additives.
AREA OF APPLICATION
- Metal products;
- Pipelines;
-Structures of steel, cast iron, light alloys employed in all natural environments, and at temperatures up to 230 °C;
- Etc.
Use of primer 〖NANO ANTI-CORROSIVE PRIMER〗 the repair of railway wagons, motor vehicles, tanks eliminates the costly blasting metal surfaces from corrosion products prior to painting.
Competitive price primer 〖NANO ANTI-CORROSIVE PRIMER〗 in combination with high technological dyeing process make economically sound use of 〖NANO ANTI-CORROSIVE PRIMER〗 in all sectors of industry and construction, as well as in the private sector consumption.
FEASIBILITY STUDY ON PRINCIPLES OF OPERATION, USE AND FEATURES
〖NANO ANTI-CORROSIVE PRIMER〗 is a one-component composition for alkyd varnish with a modifier rust and special components, penetrating into the cracks and pores of the metal and stops the ongoing process of corrosion and prevents its spread over the surface, forming a dense, insoluble chelate complexes bind strongly to the polymer component of the 〖NANO ANTI-CORROSIVE PRIMER〗 metal surface.
The ability of 〖NANO ANTI-CORROSIVE PRIMER〗 firmly tie layer of rust to 100 microns, and its high corrosion resistance minimizes extensive work on the preparation of metal surfaces for painting, especially in remote places of structures, facilities or remote routes of pipelines, bridges, and also use the NANOFIX ANTICORTM as an independent coating in order to save money.
For corrosion protection of pipelines and equipment of enterprises related to transportation and gas production, 〖NANO ANTI-CORROSIVE PRIMER〗 has a distinct advantage over conventional painting, since stopping the ongoing process of corrosion, improves the reliability of the gas supply system, whereas under normal enamel corrosion process underfilm continues until the complete destruction of the metal.
In the car-building, particularly in the repair of rail cars, currently used expensive blast cleaning metal surfaces from corrosion products prior to painting. the use of 〖NANO ANTI-CORROSIVE PRIMER〗 can partially or completely eliminate these costs while simultaneously increasing the service life paintwork.
Now, in the manufacture of bridge structures are used very expensive imported (usually two component) coatings that require the most careful adherence to the mixing of the components, and the strict control of his personal protection during painting.
The results of tests on the thermal aging (up to +230 C) indicate the possibility of using a primer in heating the housing and utilities sector and CHP.
SPECIFICATIONS
Type - anti-corrosion coating on the alkyd varnish with a modifier rust and special fillings.
Purpose - priming and painting of metal surfaces to protect against corrosion, even in the event of corrosion.
Scope - metal pipelines, structures from steel, cast iron and light alloys, working in all natural environments.
Color - Dark Brown
Usage of a single layer coating - 0,12 ÷ 0,15 kg / sq.m.
The thickness of a single-layer coatings - 0.15-0.2 mm
Drying time - 12 hours at 18-22 ° C, 40 min. at 100-110 ° C
Safety - is not toxic;
Transport and storage - 3 years at a temperature above 0 ° C, not more than one month at a temperature of from 0° C to -40° C
Operating conditions from -70° C to +230° C
INSTRUCTIONS
Surface preparation - remove: grease, dirt and salt - any organic solvent, loose rust and easy to remove old paint - brushed metal or any other suitable method.
Attention! Rust layer to 100 microns (0.1 mm) may remain on the surface without deteriorating the quality of priming.
Prepare primer - stand at room temperature, mixed thoroughly, if necessary diluted with mineral spirits, turpentine or a mixture thereof.
Application - brush, roller or spray, dip a thin continuous layer with no gaps and stains.
Coating materials - 〖NANO ANTI-CORROSIVE PRIMER〗 is compatible with all types of paints. Acetone containing enamel is applied with a thin layer after baking primer (100-110 ° C).
Attention! 〖NANO ANTI-CORROSIVE PRIMER〗 may be used alone when applied in 2 - 3 layers.